Specifications of the product:

Presentation and view in detail:

Conclusion:

The Veris Premiere is one more of the frontals multifunction more complete than they have happened through our proving stands, and all this thanks to software including, iMedian HD. From first iMon that we already saw some time ago here in Hard-h2o, as much hardware as software has been evolving for use and enjoys the users. The innumerable possibilities that to us east frontal offers happen through all type of applications multimedia that can be happened to us, and thanks to the remote control we will be able to control them without having to be patches to the computer. The unique thing that can be defined as negative is the unique version in black color, that although it does not influence in functionality, yes is an important aspect visual, if this type of devices goes more installed in our main room of house.

Before the unstoppable growth of hall computers, the famous HTPC, this type of devices become almost essential to have a total control of all functionalities.

Specifications of the product:

Presentation and view in detail:

Realised tests:

We begin our habitual tests for systems 2,1 with the listening of a set of musical subjects of diverse styles and requirements that we had loaded previously in the reproducer of our test equipment. Also, we chose a chapter of a series (by its duration mainly) with the aim of verifying the global answer of these loudspeakers in the reproduction multimedia.

It did not discourage the fact to us of not finding to us before the cleanest sound before the one than we never had been; however, its relation quality-price is fantastic, as well as the general answer in musical subjects, with low a surprising deep and acute good obtained. To lifted volumes, nevertheless, the distortion was remarkable.

We proved secondly, them with the chapter of the series that we had always chosen and we found a sound with body, clear balance and - that, that yes, we did not raise the volume too much. In order to manage this section we made use of the control with cable; we miss a wireless option, that us could have provided greater freedom of movements and perhaps extended the use rank of this set, like with a musical reproducer - option for which also it is preparation, because he is more comfortable to manage the volume from the distance instead of to have to move to us to where it is the apparatus. We were thankful, however, the magnetic screening, that avoids damages in the screen of our equipment.

Conclusion:

The global yield of this set is very good. Serious and the acute ones are mixed in perfect balance whenever we maintain the volume at a moderate level. By this, unfortunately, we cannot remove all the party to its power, although yes great part. Their reduced dimensions allow to take advantage of the space to the maximum and the control separately from the satellites and subwoofer guarantees an adjustment of the sound that adapts to the maximum to the needs of the user.

Safe by the remote control with cable (a wireless version seems more practical to us that it increases his versatility) and by the distortion of the volume when it approaches to the maximum, quality-price is a set with a magnificent 2,1 relation, that will make the delights of the portable users of and tablecloth equipment that wish loudspeakers todoterreno.

Specifications of the product:

Presentation and view in detail:

Realised tests:

As usually it is habitual when we put under a rug analysis, we have begun to prove it in daily surroundings as it is navigation in Windows and Internet. Next, we have wanted to verify its yield in diverse titles to certify if she is suitable for the game.

First we have proven the Solid X3 with the original legs and later, with the teflon legs that Ulti-Mat I recommend; the surface to the plastic being causes that the mouse runs very well by all she, although the control is something more express than in models with fabric surface. Also, the tact that offers is very pleasant, which is translated in a comfortable navigation and without interruptions. For this task, its size is very well perfect, although for small writing-desks totally it is not adapted, given his dimensions.

With regards the games, yes we have proven with the circular legs of teflon, offering a brilliant displacement and a control more containing, being very useful mainly in games FPS and strategy in real time. In addition, at no moment one moved of accidental form during the use of the mouse, which has surprised to us very pleasingly. It is in the games where we can use the Solid X3 in all their splendor, much surface of game, rapidity in the handling and control.

Conclusion:

We cannot request more to a set of these characteristics, an enormous rug in all the senses, 38 cm in width and 32 of length are ideal for any type of surroundings, or to play or for graphical design or the use of applications 3D. The fabric surface causes that it is very easy to wash it, although for some the fabric change to plastic can be something slow, mainly by the control that grants the fabric. The teflon feet are fantastic, compatible with any mouse of the market since they are circular and very small and finally grants an improved control.

She is or not a professional, this set will be adapted to the particular needs of each user, good final quality and excellent resistance.

Specifications of the product:

Presentation and view in detail:

Test equipment:

Realised tests:

We have run different tests, as much synthetic as games, to have a general vision of the yield of the graphical card. All the tests have been realised twice, the first time with the speeds of memory and nucleus of factory, and second, with overclock realised from the control center Catalyst, arriving at 1285 MHz the memories and 930 MHz the nucleus.The assembly is to the air, reason why it is not had any type of ventilation. The room temperature has stayed constant to 22º C,

and the one of the card idle has been taken directly with the program “Everest Ultimate Edition” in state and also in state full, in the states of factory and overclocking. All the games have been proven under “DirectX10”.
Conclusion:

New series HD 5000 of ATI are going to give much that to speak; diverse improvements set out to us, mainly in the power scope since it is not necessary to have a great source to be able to install HD 5770, avoiding that to change the source in case of updating of graph. The support for DirectX 11 assures to us that we will have graph for short while, compatible with the titles that are appearing throughout 2010. Technologies as “ATI Stream “or “ATI’s Eyefinity” offer the possibility to us of using the GPU like motor for the video treatment, like conversion, recompression or reescalado; we will be able to mount up to six monitors, or three enjoying the maximum resolution, everything a point in favor of  the simulation players or games of strategy in real time. To the being an average range, is inferior to yield with the highest series of HD 4800, but we looked for under consumption and new technologies, this one is our model, without a doubt. The level of overclocking in the memories can get to be very high, although we will have to use the tools necessary in its last version and a little patience to find the values optimal. With respect to the dissipator, it fulfills his function, practically maintaining the same temperatures with the values of factory and the ascents in nucleus and memories, with one more a loudness lower than in previous models, although always he is improvable, evidently.A graph with very many possibilities, DirectX 11, under power consumption, native installation multi-monitor, four exits of video and a reasonable price.

Presentation and view in detail:

Test equipment:

Test equipment:

Realised tests:

We have run different tests, as much synthetic as games, to have a general vision of the yield of the graphical card. All the tests have been realised twice, the first time with the speeds of memory and nucleus of factory, and second, with overclock realised from the control center Catalyst, arriving at 1280 MHz the memories and 880 MHz the nucleus.

The assembly is to the air, reason why it is not had any type of ventilation. The room temperature has stayed constant to 22º C, and the one of the card idle has been taken directly with the program “Everest Ultimate Edition” in state and also in state full, in the states of factory and overclocking. All the games have been proven under “DirectX10”.

In the first place we are going to execute synthetic software for graphs par excellence, “3DMark Vantage”, of Futuremark; he is able to remove best and the worse thing from each graph, by the so hard tests which it is put under. We will use the configuration by defect with a resolution of 1280×800, sufficient to prove the graphical capacity.

“Cinebench R10” is one program based on the software of animation “CINEMA 4D” which is created for creation 3D. We will use the OpenGL test that proves the terminal velocity which an animated scene can be.

Entering the section of the games already, we will begin by the “Crysis Warhead 1,1”, first sequel of “Crysis”, with the motor well-known “CryEngine 2” that as much has brought of head to players by the so high requirements of hardware. For this game, the graphical motor has been optimized and it is already possible to move the game with a PC of mean level. In order to realise the tests we have used the software “Framebuffer Crysis Warhead Benchmark Tool 0,29”, that allows us to realise identical tests with different values from resolution and qualities. We will use the values by defect solely modifying resolution, quality levels (minimum and fanatical) and filter AA, with the values 0x and 8x.

Next we happened to prove “Officers’ Club of Revolutionary Armed Forces Cry 2”, one of the played FPS more thanks to its brilliant first part. The USA the graphical motor “Dunia Engine” created by Ubisoft, which is characterized by the realism of the fire, as well as the cycles by day and night. We will use the utility of bench that accompanies the game, leaving it everything by defect and modifying solely the qualities (high and very high) and filter AA, with the values 0x and 8x.

In order to finish with the chain of tests, we run the utility of yield of “Resident Evil 5”, one of the first titles that the Nvidia technology incorporates natively 3D and that uses the graphical motor “used Capcom TM” in another title like “Weak May 4 Cry” or “Lost Planet”. With this bench we will modify the resolutions, qualities (low and high) and filter AA, with the values 0x and 8x.

Conclusion:

XFX HD 5870 has behaved of an excellent way in all the aspects; we must emphasize that our equipment and drivers will be crucial to remove the maximum yield, reason why hoped that with future versions it is increased; even so, it surpasses fully in the majority of test to the greater range of HD 4000. One will notice mainly if we played hi-res, that is where the card moves like fish in the water. The power consumption also has been improved, lowering with respect to previous models; besides this, the processing of video as much in reproduction, as reescalado or recompression will be the responsibility of the GPU, thus releasing to the CPU of this work. The dissipator fulfills its function although with so so large the ventilator it can is let notice enough with a graphical high load, being always improvable in this aspect. We cannot pardon that a high range does not accompany any title, or of software or games, since is the habitual thing for this type of graphs. The dimensions are another point to consider; the length of 28 cm will cause that we must have much well-taken care of if we have this space in our box.

High productivity, treatment of video by means of GPU and support multi-monitor, are a firm bet of future for compatible titles with DirectX 11.

Product Specifications

Presentation and detailed view:

Test team:

Tests:

The test equipment described above corresponds to the load that the source is put in charge mode (full). Is simulated by a series of resistive loads connected to the supply outlets especially the line forcing +12 V For the state “idle” has taken a fixed power of 230 W. The test equipment described in this way facilitates the comparison of tests with real equipment. It has left the system running for at least half an hour so that all components and especially the source reaches its normal operating temperature, then values taken with a digital multimeter directly into the socket on the motherboard, measurements were taken at rest (idle) and load (full).

To determine the power consumption of the equipment and the power factor, we used a power measuring device that plugs in series with the outlet of the source. The sound level emitted by the source indicated subjectively analyzer, having been the environmental temperature of 21 º C.

The stresses obtained by the multimeter readings have been very good during testing, fixing the voltages slightly above the reference to ensure good stability. Mainly emphasizes virtually non-existence of voltage drop as the load increases, the small drop of 200 mV at 720 W load is negligible. These data indicate that the voltage control circuit used in the Krypton works seamlessly ensuring at all times and under any load, sufficient power delivery and unchanged. The active PFC circuit, interesting to minimize costs in billings for power, also works perfectly not having fallen into any of the tests of the optimal value of 100%.

The next positive aspect of this source is low and almost negligible level of sound that emits the ventilation system, has been through all the trials extremely quiet, even with the big test of 720 W. This is only possible with a design of high efficiency and minimizing losses and heat generated during the transformations, while significantly reducing power consumption. That is why this model is given to certified 80 PLUS BRONZE.

Conclusion:

lines is contrasted with a burden of 80% of capacity, almost unchanged, with an efficiency that has hovered around 86% now, with power factor of 100% even at low load. With a total of four PCI-Express connectors and thanks to high amperage of the +12 V lines, we can do SLI or CrossFire X with total stability. On the other hand, silent ventilation system in all cases, thanks to the high efficiency of Krypton.

An excellent source certainly worthy of the Bronze 80PLUS certification, quiet, modular cables and a price that few brands can compete.

Features:

Presentation:
Atlas Computer brings this box NZXT, Nemesis.
Following the usual aesthetic of NZXT, Nemesis has a unique and very definite shape.
Nemesis can accommodate up to 10 units and features 7 card slots pci, agp, pci-e, …

The packaging of Nemesis and tells us that this is not a box either.
The box includes an instruction manual in English, that after reading this review did not need or out of the box.

NZXT has been careful to detail the packaging of Nemesis, in the following images we see as the box arrives protected in our hands.
It is true that the window could take some more protection, but we have not noticed any problems with the existing one.

The front of Nemesis is the opposite of any front range. Your profile can be seen below
The left side includes a window with a fan with blue LEDs 120 and the logo of Nemesis
The right side (where we see the excellent paint finish) us about the usb and audio outputs.

The front houses the following bays: 1 bay of 3 1 / 2 and 5 of 5 1 / 4.
After the front we can see a bay more than 3 1 / 2 hides and 3-unit rack inside.
The blowhole fan 120 is also behind the front, but will explain installation.

Nemesis includes audio and USB ports on the right side, providing access to these.

In detail:

NZXT Nemesis has provided a tool-less system both when installing optical drives, such as when to hold expansion cards.
The following photos are both

The setting of cards is very easy to use, just have to move the clip, insert the card into place and close the loop.
To install a drive, just put in place, shifting the subject and move the insurance down.

In previous images, they could see the accessories box, which contains the necessary fixings for the installation of our team.
This box also contains the tracks to install hard drives in the bottom rack.

The rack unit 3 1 / 2 that integrates Nemesis can be removed to install a fan 120 in the front.
To do this simply remove the 4 screws that attach it and remove it.
To reassemble, place it in your site and screwing.

The left side window, has a square design that reveals much of the interior of the box.
The fan is protected by a transparent wire mesh and logo Nemesis.

Installation

We turn now to the installation of units 3 1 / 2 in the bottom rack.
Installation is very simple, just have to put the rails on the devices and slip them into the rack.

To connect the audio and auxiliary connectors usb, look in the manual of the motherboard, or on the same motherboard, the location thereof.
You can see that this box is not Power-led, as we explain below.

A few finishing touches to the installation to finish everything.
The molex from the front, serves as the power led.
They are blue leds that need 5v, so it is advisable to connect directly to the source rather than to the board. We will use it as a bridge between the hard disk and a molex from the source.
Here’s a little animation of the anchoring system expansion cards

Now connect the fan to a molex side of the power supply and close the side with Thumb Screws that brings the series. The brightness of the frontal and lateral enough without being annoying, but also look at the Nemesis logo front lit red
This logo is the Ide-Led and as you can see, NZXT has placed him in a conspicuous place.

Rating:
Nemesis is available in several colors, and as was seen before the finish of the paint (at least in the black that is what we have been able to analyze) is excellent.
The finish of the window is sober but elegant and well-defined front, normal features of NZXT.
It is unfortunate that due to your door regulators can not be installed in front of fans, albeit with a dremel and patience you can do miracles …
Nemesis series brings no power supply, but you can install any market.
Finally, highlighting its great capacity to house 10 units in total, all screw-less.

Presentation:
The memory heatsinks Revoltec Ram Freezer analyzed, are made of copper, but a model that is made of aluminum and weighing 30g.
We have for this analysis with models Gold, Platinum and Cooper

The blister pack contains: 
Both sides of the heatsink, with thermal adhesive strip on both.
Fastening clips
Filler strip to one side modules

In the photo above we see the 3 models tested, although its appearance is due to the environment is static, a little later we see them in their natural habitat where they stand much more.
Meanwhile, we continue with sinks inside and focus on what will be the area of contact between the memory modules and heatsinks. This is a crucial element in obtaining a better result.
As we can see, this is an adhesive strip of 3M brand Scotch Inscripcción with 467 MP.
The following pictures strip is determined by the module to the heatsink and heat transfer in the same direction.
Surely it would be better off if the contact thermal direct or thermal paste, but the strip is engaged in the task of keeping together the module and the heatsink, so it’s a necessary evil.

As mentioned before, these coolers are compatible with both modules with SDRAM and DDR modules.
The following image shows the heatsink installed on a SDRAM module, the rest of the review is made of DDR modules

It’s time to see the appearance of the modules, once installed on your computer.
The choice of one model or another will not affect the performance since all are made of copper, but depending on the configuration of the mod aesthetic will be convenient to choose one or the other.
The following illustrations come to give an idea of how each of them, being more the mirror effect in the Gold version followed by the Platinum version and ending with Cooper on this aspect.

Focusing the objective now-secured in the clips and hinges heatsinks.
This is where we find a negative point of these heatsinks. All models feature silver clips instead of bringing the same color as the sink.
It can be seen at the Cooper the color change between the clip and the heatsink and although a small detail, are the details that make the difference.
As hinges are very simple to use and fulfill their role to perfection, so there is not much that comment.

If you have memory modules only have chips on one side, the strip we see space below will be of great utility.
Its function is to fill the gap left by the absence of the fixing chips and continue to be as effective in any module.
The second image shows the small torture to which we referred to the Gold model to show you that like platinum and Cooper, this model also made of copper that.
We chose the inside of the hinge to be the least visible once installed, although we could have done with any part of the heatsink.

Finally we close this review with a picture of the Platinum model with a view to something more global view of the module integration in the system.
The opening in the top of the heatsink, between clips of subjection assume that chimney will act for the internal heat sink and not into a furnace.

Conclusion:
This type of coolers, but its function is to cool as far as possible the memory modules, given its performance adhesive strip of this function is only moderate.
The finish of sinks is of very high quality, with the only downside of not to include clips of the same color.
These coolers are compatible with SDRAM and DDR modules either one side or both.

Presentation:
Thermaltake offers a heatsink based on Heat Pipes Technology, Socket 478, Socket A and K8.
This is the Pipe 101. The following images can be viewed as the Heat-Pipes, which we will focus later

The package includes a fairly complete set of accessories:
Manual of instructions for the proper anchorage to the type of socket
Screws to secure the heatsink fan and anchoring the socket (if necessary)
Thermal Paste
Anchors Socket: Intel Socket 478 and AMD K8

It is a heatsink made of copper 100%, both the base and the fins (welded to the base)
The surrounding trim is made of aluminum

Also incorporates four Heat Pipes to help quickly transfer the heat generated in the micro core to the periphery of the heatsink.

The polishing of the base is weak for a product that tries to compete in the high end. One can see that does not get a mirror effect and although the touch is very smooth, there are machining marks.
It will be convenient to use a good thermal paste, to compensate for this deficiency.

It also incorporates an aluminum trim (which is screwed the fan), which gives a very good aesthetic to the whole. This requires removing the anchor to place depending on the type of socket they are going to use the pipe 101.

Once stripped of embellecerdor can be seen across the four fins Heat Pipes as well as details of the soldier at the base (of the Heat Pipes and fins).

In particular, the anchor for Socket A (the one I used when taking measurements) is convenient, since it incorporates closures to allow tightening with a screwdriver to fix it when the socket without that pressure from escaping and damaging the motherboard.

Performance
To see that this yields Pipe101 I use a system based on Socket A.
The equipment used for measurements is as follows:
Motherboard: Abit NF7-S 2.0
Microprocessor: AMD AthlonXP 2800 +
Memory: 2×512MB TwinMos DDR400
Hard Drive: 80Gb + 40Gb Seagate Barracuda IV 7200 RPM
Graphics Card: ATI Radeon 9100
Operating system: WindowsXP Professional + Service Pack 1a
Thermal Paste: Artic Silver 5
Procedure:
Idle Temperature (software running):
Operating Systems
AbitEQ (program monitoring voltages and temperatures).

Full temperatures (software running):
Operating Systems
AbitEQ (program monitoring voltages and temperatures).
Peer To Peer (eMule)
Mp3 Playback (WinAmp)
Software to stress the micro: Prime95 (2nd test: In-Place Large FFTs, maximum heat, power disipation)

Measurements:
As a fan I used a Thermaltake Silent Cat 9cms
And as the temperatures included reference to a low-end sink under the same conditions (Artic Cooling Copper Silent 2L

Considering the temperature difference, the result is not bad considering the price of this sink is not the highest.
That yes, maybe not worth paying twice the price of a sink low-medium range (like the Artic Cooling) to deal with micros without overclocking.

Here it is seen as the Artic cooling is unable to handle the temperature that produces the micro overclocked. The temperature rose gradually to the limit I set for system shutdown due to overheating.
I think at some point would come to stagnate, but it seemed because the increase was constant and less than an hour in the 63 th alcazar

When overclocked, it is seen as un-Pipe 101 is a low-performance heatsink. He comes to driving on a micro ACPET temperature (it should be borne in mind that the temperature was higher than in the previous case).
Yet the values begin to be high, even more so considering that when the summer temperature will rise a few degrees.
It is seen that a heatsink is suitable for overclockings media (unless combined with a Silent Cat), but we should think of another combination heatsink / fan to go much further.

Conclusion:
As a clarification saying that my aim has been to achieve the highest overclock possible. As with the voltage (Further tests) the micro rises above the 3300 + (ie reaches 3300 + with lower voltage, resulting in lower temperatures).
The test function is to give you an idea of the range of temperatures encountered in overclockings media (up to 1.85v for Bartons). To follow up would be necessary to reconsider voltage and cooling.

For the price it costs (about 30 without fan) gives a good performance on overclockings media without paying what it costs to other more expensive models (such as the Thermalright XP 94/97).
Also a heat sink is versatile, valid for many of the existing sockets.
Certainly a good option in terms of price / performance.

Presentation:
Presents these grids Coolmod 3d laser technology.
They have an impressive sight and a perfect finish to a very special grids.

Content:
In the blister 3d grid and find the 4 screws required for installation (you can see the screws in the next photo).

Features:
What is different from the rest of these grilles is undoubtedly its profile in 3 dimensions.
In the following pictures you can appreciate this feature.

Installation:
The installation of these grids does not differ from the installation of other screens, but still took the opportunity to comment that you have some templates available in the downloads section.

Conclusion:
It is difficult to describe these grids 3d, best to get an idea is to see the photos.
In any case, what if we analyze is that the finish is extraordinary, considering that the price difference between these grids and normal is negligible, become an interesting option for protecting your fans (or your fingers)