Information from the review:
Product: NZXT Nemesis
Manufacturer: NZXT
Supplier: Atlas Computer
Features:
Presentation:
Atlas Computer brings this box NZXT, Nemesis.
Following the usual aesthetic of NZXT, Nemesis has a unique and very definite shape.
Nemesis can accommodate up to 10 units and features 7 card slots pci, agp, pci-e, …
The packaging of Nemesis and tells us that this is not a box either.
The box includes an instruction manual in English, that after reading this review did not need or out of the box.
NZXT has been careful to detail the packaging of Nemesis, in the following images we see as the box arrives protected in our hands.
It is true that the window could take some more protection, but we have not noticed any problems with the existing one.
The front of Nemesis is the opposite of any front range. Your profile can be seen below
The left side includes a window with a fan with blue LEDs 120 and the logo of Nemesis
The right side (where we see the excellent paint finish) us about the usb and audio outputs.
The front houses the following bays: 1 bay of 3 1 / 2 and 5 of 5 1 / 4.
After the front we can see a bay more than 3 1 / 2 hides and 3-unit rack inside.
The blowhole fan 120 is also behind the front, but will explain installation.
Nemesis includes audio and USB ports on the right side, providing access to these.
In detail:
NZXT Nemesis has provided a tool-less system both when installing optical drives, such as when to hold expansion cards.
The following photos are both
The setting of cards is very easy to use, just have to move the clip, insert the card into place and close the loop.
To install a drive, just put in place, shifting the subject and move the insurance down.
In previous images, they could see the accessories box, which contains the necessary fixings for the installation of our team.
This box also contains the tracks to install hard drives in the bottom rack.
The rack unit 3 1 / 2 that integrates Nemesis can be removed to install a fan 120 in the front.
To do this simply remove the 4 screws that attach it and remove it.
To reassemble, place it in your site and screwing.
The left side window, has a square design that reveals much of the interior of the box.
The fan is protected by a transparent wire mesh and logo Nemesis.
Installation
We turn now to the installation of units 3 1 / 2 in the bottom rack.
Installation is very simple, just have to put the rails on the devices and slip them into the rack.
To connect the audio and auxiliary connectors usb, look in the manual of the motherboard, or on the same motherboard, the location thereof.
You can see that this box is not Power-led, as we explain below.
A few finishing touches to the installation to finish everything.
The molex from the front, serves as the power led.
They are blue leds that need 5v, so it is advisable to connect directly to the source rather than to the board. We will use it as a bridge between the hard disk and a molex from the source.
Here’s a little animation of the anchoring system expansion cards
Now connect the fan to a molex side of the power supply and close the side with Thumb Screws that brings the series. The brightness of the frontal and lateral enough without being annoying, but also look at the Nemesis logo front lit red
This logo is the Ide-Led and as you can see, NZXT has placed him in a conspicuous place.
Rating:
Nemesis is available in several colors, and as was seen before the finish of the paint (at least in the black that is what we have been able to analyze) is excellent.
The finish of the window is sober but elegant and well-defined front, normal features of NZXT.
It is unfortunate that due to your door regulators can not be installed in front of fans, albeit with a dremel and patience you can do miracles …
Nemesis series brings no power supply, but you can install any market.
Finally, highlighting its great capacity to house 10 units in total, all screw-less.
Tags: 7 card slots pci, LEDs 120, NZXT Nemesis