Features:
Presentation:
The memory heatsinks Revoltec Ram Freezer analyzed, are made of copper, but a model that is made of aluminum and weighing 30g.
We have for this analysis with models Gold, Platinum and Cooper
The blister pack contains:Â
Both sides of the heatsink, with thermal adhesive strip on both.
Fastening clips
Filler strip to one side modules
In the photo above we see the 3 models tested, although its appearance is due to the environment is static, a little later we see them in their natural habitat where they stand much more.
Meanwhile, we continue with sinks inside and focus on what will be the area of contact between the memory modules and heatsinks. This is a crucial element in obtaining a better result.
As we can see, this is an adhesive strip of 3M brand Scotch Inscripcción with 467 MP.
The following pictures strip is determined by the module to the heatsink and heat transfer in the same direction.
Surely it would be better off if the contact thermal direct or thermal paste, but the strip is engaged in the task of keeping together the module and the heatsink, so it’s a necessary evil.
As mentioned before, these coolers are compatible with both modules with SDRAM and DDR modules.
The following image shows the heatsink installed on a SDRAM module, the rest of the review is made of DDR modules
It’s time to see the appearance of the modules, once installed on your computer.
The choice of one model or another will not affect the performance since all are made of copper, but depending on the configuration of the mod aesthetic will be convenient to choose one or the other.
The following illustrations come to give an idea of how each of them, being more the mirror effect in the Gold version followed by the Platinum version and ending with Cooper on this aspect.
Focusing the objective now-secured in the clips and hinges heatsinks.
This is where we find a negative point of these heatsinks. All models feature silver clips instead of bringing the same color as the sink.
It can be seen at the Cooper the color change between the clip and the heatsink and although a small detail, are the details that make the difference.
As hinges are very simple to use and fulfill their role to perfection, so there is not much that comment.
If you have memory modules only have chips on one side, the strip we see space below will be of great utility.
Its function is to fill the gap left by the absence of the fixing chips and continue to be as effective in any module.
The second image shows the small torture to which we referred to the Gold model to show you that like platinum and Cooper, this model also made of copper that.
We chose the inside of the hinge to be the least visible once installed, although we could have done with any part of the heatsink.
Finally we close this review with a picture of the Platinum model with a view to something more global view of the module integration in the system.
The opening in the top of the heatsink, between clips of subjection assume that chimney will act for the internal heat sink and not into a furnace.
Conclusion:
This type of coolers, but its function is to cool as far as possible the memory modules, given its performance adhesive strip of this function is only moderate.
The finish of sinks is of very high quality, with the only downside of not to include clips of the same color.
These coolers are compatible with SDRAM and DDR modules either one side or both.